Range : 9 feet to 26 feet
Standard Accessories
- 14" Chuck Plate
- Change Gear Set (Heavy Rype)
- Tool Post Bolt Key
- Motor Pulley
- Steady Rest 16" Bore
Technical Specifications
| Height of Center | - | 609.6mm |
| Bed Width | - | 609.6mm |
| Swing over Bed | - | 1150mm |
| Swing over Cross slide | - | 865mm |
| Movement of cross slide | - | 750mm |
| Swing in Gap | - | 1600mm |
| Bed Type | - | 2V & 2 Flat |
| Drive V-Belt | - | 3 Belt 'C' Section |
| Spindle Bore | - | 90mm to 200mm |
| Spindle Nose & Threadad | - | 6TPI |
| Tail stock Spindle Dia/Taper | - | 100mm/MT-5 |
| Tail stock Spindle Travel | - | 350mm |
| Compound Dlide Travel | - | 250mm |
| Lead screw Diameter & pitch | - | 50.8mm/2TPI |
| Renge of Matric Threads | - | 1 to 6 |
| Renge of inch Threads | - | 1 to 24 |
| Electric Motor 1440 RPM. | - | 7.5 HP/3 Phase |